Did you know that you deserve to use salt water to do a light bulb shine? It sound crazy, but it"s true! This is since saltwater is a an excellent conductor of electrical energy which makes s water a source for renewable energy.

You are watching: Is salt a conductor or insulator

Salt molecules are made of sodium ions and also chloride ions.

(An ion is an atom that has actually an electric charge because it has either got or lost an electron, also definition it has a confident charge and also a negative charge.)

When you put salt in water, the water molecules traction the sodium and chlorine ion apart for this reason they room floating freely, raising the conductivity. These ions space what carry electricity through the water v an electrical current. In short, saltwater (water + sodium chloride) can assist to create electricity. If this can be done on a huge scale, let"s shot a small-scale funny science task to see just how it works! A project favor this would make a an excellent science fair task for primary school or middle school.


*

DIY Saltwater Circuit Project

What girlfriend Need:

Masking tapeWater (can it is in tap water)Salt (table salt)Aluminum foilWhat you Do:Wrap 2 tongue depressors in aluminum foil. These will be your electrodes.Cut three 6-inch pieces of insulated copper wire and also strip a half-inch the insulation off each end.Take the 2nd piece of wire and connect the light bulb socket with one of the electrodes. Use masking tape come stick the bare finish of the cable on the aluminum foil close to the height of the electrode.Use the 3rd piece of wire to affix the an adverse terminal the the battery v the various other electrode.Test the end your circuit by touching the two electrodes together. This should finish the circuit and enable electricity to circulation from one terminal the the battery come the other, lighting up the light pear in the process. If the pear doesn"t light up, inspect your wire connections to make certain they space all secure, and then shot again.

How to test a Circuit in Water

Pour 1 cup that water into a cup or beaker. (If you have actually distilled water, that will work-related best.)Put the 2 electrodes in the cup, but don"t allow them touch every other. What wake up to the irradiate bulb?Remove the electrodes native the cup and also then row in a tespoon of salt till it dissolves. Put the electrodes in the saltwater without touching them together. Clock the light bulb.

The light bulb lit up since the sodium and also chlorine ions performed the electricity (an electric current) from one electrode come the other. This completed the an easy circuit, causing the light pear to shine.

Try adding an ext table salt and see if the light bulb shines brighter. Use a buzzer instead of a irradiate bulb and see if an ext or less salt in the water renders the buzzer ring louder or softer.

See more: What Size Does A 200 Lb Man Wear, Men'S Suit Size Chart

If you desire to shot another scientific research experiment, you can finish this solar distillation project to obtain fresh water the end of saltwater and then usage your saltwater circuit to test the water friend distill! Freshwater won"t command electricity and also saltwater.