Can you reduced wet wood with a one saw? It’s most likely a concern you have actually in mind right currently in a instance where you’re about to occupational in a block of wet wood, and you only have a one saw.

You are watching: Can you cut wet wood with a circular saw

A circular experienced can’t reduced wet wood, and it’s dangerous since wet hardwood gets warp. One saws have actually a fine-tooth blade, therefore there’s a possibility that it will load and also bind on the damp wood. A chainsaw or various other coarse-toothed saws space a much more suitable device for the job.

Find out why it’s risky to reduced wet timber using a circular saw. You’ll also have a much better understanding of exactly how to work on moist lumbers.

What is the ideal Tool to cut Wet Wood?

As mentioned, a chainsaw is the best tool to reduced wet wood because it’s already lubricated with a chain oil to store it indigenous functioning well. So, the extra moisture on the wood won’t make any an obstacle in cutting, and also the chainsaw will still run through normally.

Water on the wood might be a difficulty in cutting, however there’s no require to worry when utilizing a chainsaw. However, make sure to keep your working website clean and cost-free from standing water come avoid shedding your foot balance.

Will Exposure come Rain pains the Wood?


Exposure to rain or various other wet problems for a lengthy period have the right to hurt the wood. Woods space all water-resistant due to the fact that the glue offered in manufacturing them space waterproof. However, it doesn’t guarantee the the lumber deserve to survive extended exposure come wet conditions.

When will Rot in the hardwood Takes Place?

Wood rot starts when the moisture contents reaches 20 percent that the wood. That is a gradual process wherein fungi begin to develop and also feed top top the cellulose in the lumber. In ~ 48 hrs of constant exposure come wet situations, mold spores might be currently visible.

How to stop Wood break down from Wet Conditions?


The solution is to protect against or get rid of your timber from obtaining wet. If it’s impossible since you room working in open up areas, you have to remove the water quickly. 

All your woods must be dry out quick, and also sweep was standing water right away. Girlfriend can also cover her lumber, yet don’t pave it also tight because they likewise have to breathe. 

Then, placed your timber where there’s a proper humidity come ensure it will certainly be at the exactly EMC when building time comes. Together a dominion of thumb, offer the lumber at the very least 4 inches higher from the ground so the air can acquire through under the cover.

How lengthy Does It take for lumber to dried Out?

Generally, dry out damp timber takes approximately one year per inch of hardwood thickness. It is the lot of time investment that a woodworker requirements to wait when air-drying lumbers. For many wood manufacturers, that is the amount of time they mean to produce woodworking lumber favor plywood.

The strength of making use of a Kiln

A Kiln helps manage the drying process of wood, particularly the special ones. That is a huge insulated room or room used to control and balance temperature, airflow, and humidity. The goal of using Kiln is to carry down the humidity level of hardwood safely. Through Kiln, wood deserve to dry evenly and uniformity leading to a quicker drying process. 

What are the dry defects of a Kiln?

A kiln is advantageous in scorching woods, yet there room some dry effects connected with making use of Kiln.

Case Hardening

Improper scheduling of when to usage Kiln, and not making use of corrective measures provides internal stresses right into the wood. It results in a condition called case Hardening. The type of defect that happens when the external shell starts to dried too fast than the core. As an effect, the exterior shrinks yet the inside continues to be wet.


As the core starts to obtain dry, and also the outer part continuously shrinks. It causes extreme situation hardening conditions, within the facility can split and check in one irreversible problem called honeycombing.

Is It okay for Plywood to get Wet?


Almost all exterior plywood and oriented strand board (OSB) the carries the American Plywood combination (APA) trademark space 100 percent waterproof.

These are the commodities that you can trust. It method that the glues used to stick hardwood strands are water-resistant. They are from factories the manufacture a durable course of woods.

However, together mentioned, too much wet have the right to make rotten wood. So, that is okay for plywoods to get wet, but, again, too much soaked in water will damage the material. Water can’t give any type of damage to the hardwood unless there’s constant contact for prolonged period.

How to measure up Moisture content of Wood?

There room two means to measure the moisture contents of the wood. It’s one of two people oven-dry experimentation or usage of moisture meter.

1. Oven-Dry Testing

It is a traditional way of measuring humidity content, within it requires drying the lumber in a well-ventilated cooktop or Kiln because that a long time. It is likewise the many accurate and also efficient way of measuring moisture content, however it takes a very long time. After completing the drying cycle, it requires verification of the weight of both blocks of wood.

Then, the procedure starts native the beginning until the fixed of the wood stops changing. The difference in between the load of dried the end lumber and also the mass of the wood’s initial weight provides you an exact percent that moisture content on the lumber.

2. Humidity Meter

Using a humidity Meter is faster contrasted to range Dry Testing. That doesn’t take a lengthy period. This modern technique will provide you a fast and accurate reading of the moisture content on the wood. Plus, it come in different types.

Pin-Type Meters

It entails two or much more electrodes in measure up the wood’s moisture contents using electric resistance. Higher resistance come the electric current way drier lumber and also vice versa. However, pin Meters will leave small holes top top the timber as they check the moisture level. It’s due to the fact that you need to penetrate the meter right into the hardwood to get specific reading.

How to usage Pin-Type Meters?

Using a Pin-Type Meter is simple. You need to insert the pins into the hardwood that you want to test and also activate the meter. There’s one electrical existing passing indigenous the badge to the lumber, and back to the pin. Then, the Pin-Type meter will offer you an accurate reading based upon the current resistance.

Pinless humidity Meters

It offers a devoted scanning bowl passing electromagnetic waves v the timber to recognize the humidity level. The doesn’t leave any kind of tiny holes on the wood. However, utilizing Pinless meters calls for completing a contact between the scanning plate and also the wood to get an accurate measurement.

How to use Pinless humidity Meters?

In utilizing Pinless moisture Meters, every you need to do is come secure it against the wood and also press the base of the scanning plate. Activate the meter, and it will scan the moisture content. The an excellent thing is that Pinless meters are faster compared to pin-type meters.


How to dried Wet wood Fast?

There’s no easy and also fast way to dry wet woods. It requires time and also patience, especially for special lumber. You have to wait till the core dries completely both inside and out. The great news is that you can still work and also cut wet wood using a chainsaw.

How Dry must Wood Be for Woodworking?

Generally, the most acceptable moisture level of wood depends on the type, its thickness, and the average relative humidity (RH) in an environment where girlfriend will usage the wood. However, based upon standard guidelines, it must be 6 to 8 percent for indoors and also 9 come 14 percent for construction.

How much Thickness a Circular experienced Cut?

A circular witnessed is a an effective tool the can cut wood, steel, masonry, and also ceramic tile listed that supplies the ideal blade because that each material.

See more: What Is 43 Is What Percent Of 86 ? = 50 43 Is What Percent Of 86

Final Words

A chainsaw is safer to usage over a one saw as soon as it involves wet woods. Together a basic rule, constantly dry out the woods first before cut them. However, because it bring away time to dried wet lumber, most woodworkers choose using other saws to start their wood projects.

Woods from reliable manufacturers space water-resistant, yet it doesn’t mean that they deserve to withstand too lot water exposure. If castle have prolonged water contact, it may an outcome in break down. So, it’s essential to dry the wood and eliminate all standing water. Far better yet, constantly keep them dry.