Nissan Altima 2007-2012 organization Manual / Transaxle & transmission cvt: RE0F10A / On-vehicle maintain / CVT fluid
CHECKING CVT FLUID
Fluid level should be checked with the liquid warmed up to 50° come 80°C (122° come 176°F). The fluid level checkprocedure is as follows:1. Inspect for fluid leakage.
You are watching: 2007 nissan altima transmission fluid check
2. Through the engine warmed up, journey the car in an city area.
When approximately temperature is 20°C (68°F), the takes around 10minutes because that the CVT fluid to warmth up come 50° to 80°C (122° to176°F).
3. Park the vehicle on a level surface.
4. Use parking brake firmly.
5. Through engine in ~ idle, while boring brake pedal, relocate shiftselector throughout the entire change range.
6. Pull out the CVT liquid level gauge indigenous the CVT liquid chargingpipe after pressing the tab on the CVT fluid level gauge torelease the lock.
7. Wipe fluid off the CVT liquid level gauge. Insert the CVT fluidlevel gauge rotating 180° indigenous the originally installed position,then securely push the CVT liquid level gauge till it meets thetop end of the CVT liquid charging pipe.
CAUTION:When wiping away the CVT liquid level gauge, always uselint-free paper, not a towel rag.
8. Location the selector bar in “P” or “N” and make certain the fluidlevel is within the specified range.
CAUTION:When reinstalling CVT liquid level gauge, insert it into theCVT liquid charging pipe and also rotate it come the original installationposition till it is securely locked.
CVT liquid CONDITION
Check CVT fluid condition.
• If CVT liquid is really dark or smells burned, inspect operation the CVT.
Flush cooling system after repair of CVT.
• If CVT fluid includes frictional material (clutches, brakes, etc.),replace radiator and also flush cooler line utilizing cleaning solvent andcompressed air after fix of CVT. Refer to CO-15, "Removal andInstallation" and TM-418, "Cleaning".
Changing CVT liquid
1. Heat up CVT fluid by steering the vehicle for 10 minutes.
• Radiator (2)• CVT liquid cooler hose
3. Refill until brand-new CVT fluid comes out from CVT liquid cooler hose
NOTE:About 30 to 50% extra fluid will be required for this procedure.
4. Examine fluid level and condition. Describe TM-416, "Inspection".
CAUTION:• Use just Genuine NISSAN CVT fluid NS-2. Never mix with various other fluid.
• utilizing CVT fluid other than real NISSAN CVT liquid NS-2 will deteriorate in driveability andCVT durability, and may damage the CVT, i beg your pardon is not spanned by the warranty.
• once filling CVT fluid, take treatment not come scatter heat generating components such as exhaust.
• sufficiently shake the container the CVT fluid before using.
See more: How Many Eggs Can A Hen Sit On, How Many Eggs Can A Broody Hen Sit On
• Delete CVT fluid deterioration date with CONSULT-III after transforming CVT fluid. Refer to TM-34,"CONSULT-III duty (TRANSMISSION)".
various other materials:
P1574 ASCD auto speed sensor DescriptionThe ECM receives two auto speed signal via CAN interaction line. One is sent out from combinationmeter, and the other is from TCM (Transmission regulate module). The ECM supplies these signals for ASCD control.Refer to EC-603, "System Description" for ASCD functions.D ...
Basic investigate DIAGNOSIS and REPAIR WORK circulation Work FlowOVERALL SEQUENCEDETAILED FLOW1.GET details FOR SYMPTOMGet the in-depth information indigenous the customer around the symptom (the condition and also the setting whenthe incident/malfunction occurred) using the “Diagnostic work-related Sheet”. (Refer ...
Front hand-operated seat convey (if so fitted Forward and backwardPull the facility of the bar up and hold that while youslide the seat forward or backward to the desiredposition. Release the bar to lock the chair inposition.RecliningTo recline the seatback, traction the bar up and leanback. To bring the seatback forward, traction the le ...