Many Ford Explorers and Mercury Mountaineers were produced with an option known as the Ford keyless entrance keypad. Part models describe it together SecuriCode as well. It is a five-button numeric keypad that is supplied to:

Eliminate fumbling for her keysPrevent lockoutsProvide easy entry to your vehicle

The keyless entry offers a five-digit code to unlock the doors when it is gotten in correctly. The five-digit code have the right to be readjusted from the default code set at the manufacturing facility to a user-defined code. The customers can set it to whatever sequence lock want, providing much better security and a code they will remember.

It can take place that the code you collection is forgotten, and also you are locked the end of your vehicle. It is additionally a consistent occurrence that, when a car has been sold, the password isn’t provided to the brand-new owner. If the default password isn’t on hand either, it have the right to leave the keyless keypad useless and increase the opportunity of gift locked out of your vehicle.

On Ford Explorers and also Mercury Mountaineers, it might be possible to retrieve the five-digit default code manually through a few easy steps.

Method 1 the 5: inspect your documentation

When a Ford explorer or Mercury Mountaineer is offered with the keyless entry keypad, the default password is provided with the manuals and owner’s products on a card. Retrieve your code from the paperwork.

You are watching: 2002 ford explorer keyless entry code

Step 1: look at in your owner’s manual. Flip with the pages to find the card through the code printed on it.

If you purchased the automobile second-hand, check if the password is composed on the within cover through hand.

Step 2: inspect your card wallet. Watch in the card wallet you were detailed from the dealer.

The password card may be loosened in the wallet.

Step 3: inspect your glove box. The password card might be loose in the glove box, or the code may be composed on a sticker in the glove box.

Step 4: enter the code. To get in your keyless keypad code:

Enter in the five-digit password in orderSelect the associated crucial to pressPress the 3-4 button within 5 seconds of entering your password to unlock her doorsLock your doors by pushing the 7-8 and also 9-10 buttons at the very same time

Method 2 of 5: find smart junction crate (SJB) 2006-2010

On Ford Explorers and also Mercury Mountaineers from 2006 until the model year 2010, the default five-digit keypad password is published on the clever junction box (SJB) under the driver’s side of the dash.

Materials Needed

FlashlightScrewdriver or tiny socket setSmall winter on one extension

Step 1: watch at your under dash. Open up the driver’s door and lay on your earlier in the driver’s footwell area.

It is cramped for an are and friend will acquire dirty if the floor is dirty.

Step 2: Take off the under dash cover. Remove the under dash sheathe if over there is one in place.

If there is one, you might need a screwdriver or a little socket set and ratchet to remove it.

Step 3: locate the SJB module. That is a big black box mounted up under the dash above the pedals. Over there is a long yellow wiring connector that plugs into it 4-5 inches in width.

Step 4: situate the barcode label. The label is directly below the connector dealing with the firewall.

Use her flashlight to find it under the dash.

Step 5: find the code on the module. Situate the five-digit default keypad code on the module. That is under the barcode and is the only 5 digit number on the label.

Use your extendable winter to get a see of the backside the the module to read the label.

When the area is illuminated v the flashlight, you need to easily have the ability to read the code in the mirror’s reflection.

Step 6: get in the password on the keypad.

Method 3 that 5: find the rap Module

The default keypad code for Explorers and Mountaineer for version years 1999 come 2005 can be uncovered on the far Anti-Theft Personality (RAP) module. There room two possible locations because that the lab module.

Materials Needed

FlashlightSmall mirror on one extension


Step 1: uncover your tire adjust compartment. On many 1999 come 2005 Explorers and also Mountaineers, you can discover the rap module in the compartment whereby the tire readjust jack is located.

Step 2: find the cover because that the jack. The cover will certainly be ~ above the driver’s behind in the cargo area.

It is about 4 inches tall and also 16 inch wide.

Step 3: eliminate the cover. There space two lever-style connectors that hold the sheathe in place. Background both levers to relax the cover and also lift it out of place.

Step 4: find the lab module. The is located just in former of the jack compartment opening, placed against the side body panel.

You won’t be able to see the label clearly from this vantage point.

Step 5: check out the default keyless code. Light a flashlight as best you can on the label, then usage a mirror on an expansion to check out the password off the label. That is the only five-digit password on there.

Step 6: install the jack cover. Placed the 2 bottom alignment tabs in place, push the panel into its location, and press the two levers under to lock that in place.

Step 7: enter the keyless code.

Method 4 the 5: find the lab module ~ above the rear passenger door

Material Needed



Step 1: discover the passenger chair belt panel. Find the panel where the passenger rear seat belt start the tower area.

Step 2: Pry the panel loose by hand. There are a couple of tension clips that host it in place. A certain tug native the top should pop the dashboard off.

Warning: The plastic can be sharp, so you might want to usage gloves to eliminate trim panels.

Step 3: remove the seatbelt retractor panel. Pull the panel covering the seat belt retractor away. This panel is directly listed below the one you pulled off.

You don’t have actually to totally remove this part. The module is right below the other panel friend removed.

Step 4: Look because that RAP module. Shine a flashlight behind the panel. Friend will view a module v a label on that which is the rap module.

Step 5: get the five-digit code. Check out the five-digit code off the label, then snap all the panels earlier in place, lining up the tension clips through their areas in the body.

Step 6: get in the default keypad password in the keypad.

See more: How Many Calories In A Big Bag Of Cheetos Puffs Are In A Bag?

Method 5 that 6: usage the MyFord function

Newer Ford Explorers might use a touchscreen screen system well-known as MyFord Touch. It controls comfort and also convenience systems including SecuriCode.

Step 1: push the "Menu" button. V the ignition on and the doors closed, press the “Menu” switch at the optimal of the screen.

Step 2: push the “Vehicle” button. This shows up on the left side of the screen.

A food selection comes up that includes the option “Door Keypad Code.”

Step 3: choose “Door Keypad Code” native the alternative list.

Step 4: set your keypad code. Enter the default keypad password from your owner’s manual, then get in your brand-new personalized five-digit keypad entry code.

It is currently set.

Method 5 of 5: contact your Ford dealership

If no one of the alternatives were effective in retrieving your default keyless keypad code, friend will need to go to the Ford dealer to have actually a technician retrieve the password from the computer. The technician will usage a diagnostic scanner to retrieve the code from the rap or SJB module and administer it come you.

Typically, dealers fee a fee because that retrieving keypad codes because that customers. Ask front of time what the charge is because that the service and be all set with payment when the procedure has to be completed.