The oil sending unit ~ above the 2000 Ford F-150 relays the oil press from the engine to the oil pressure gauge ~ above the dash. The oil sending unit is among the most important components on the engine. The oil is pumped increase from the oil pan through the oil pump and also through the engine. If the oil is circulating through the engine, the oil passes with the oil sending unit. The oil sending out unit then tells the oil gauge the specific oil pressure. Once the oil sending out unit stops working, girlfriend will must replace that as shortly as possible.

You are watching: 2001 ford f150 4.6 oil pressure sending unit location

Jack the former of the van up and also place jack stands underneath the prior axle. Make certain that the jack stands space evenly and also securely under the prior axle. Lower the van onto the axle.

Remove the driver"s next front tire. Rotate the lug nuts counterclockwise to loosen and also remove the lug nuts. Traction the tire off and collection it to the side.

Locate the oil sending out unit ~ above the driver"s next of the engine. The oil sending unit top top the 2000 Ford F150 is located underneath the oil filter. The oil sending unit will certainly be screwed into the oil filter housing. Remove the wiring insert from the bottom that the oil sending unit. Press in ~ above the plastic cable connector and also pull the wiring connector the end of the bottom that the oil sending out unit. Placed an open finish wrench around the head that the oil sending out unit near the threads and also loosen the unit by turning it counterclockwise. When the oil sending out unit is loose, you can remove that by unscrewing it through your fingers. Place a small catch pan under the oil sending unit to retrieve any kind of excess oil.

Wrap Teflon tape approximately the subject of the oil sending unit. Be certain to wrap the Teflon ice counterclockwise roughly the subject or the tape will certainly come off once you screw the oil sending unit back into the filter housing.

Screw the oil sending out unit back into the oil filter housing. Revolve the sending out unit clockwise come tighten. Carry out not overtighten the sending unit or it can break off. Plug the wiring connector earlier into the bottom that the oil sending unit.

Crank the engine to make sure that the oil sending unit is functioning properly and also that there space no leaks. Then turn the engine off.

See more: Bud, Not Buddy Band Members, Bud Not Buddy Band Members Flashcards

Jack Jack was standing Lug wrench Open end wrenches tiny catch pan Teflon tape replacement oil sending unit
Make certain that the engine has actually cooled off before removing the oil sending out unit. The oil sending unit deserve to get very hot and burn your hands.

Grace Mclain has actually been creating professionally because 1998. Her articles have showed up on, and LIVESTRONG.COM, and also she specializes in automotive and also business topics. McIain has a expert writing certificate from JB hunt in small Rock, Ark.